bcv47 document number: ds33001 rev. 4 - 2 1 of 5 www.diodes.com december 2012 ? diodes incorporated bc v 47 a product line o f diodes incorporated 60v npn darlington transistor in sot23 features ? bv ceo > 60v ? darlington transistor h fe > 10k @ 100ma for high gain ? i c = 500ma high continuous collector current ? complementary darlington pnp type: bcv46 ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability ? ppap capable (note 4) mechanical data ? case: sot23 ? case material: molded plastic, ?green? molding compound ? ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? matte tin plated leads, solderable per mil-std-202, method 208 ? weight 0.008 grams (approximate) ordering information (notes 4 & 5) part number compliance marking reel size (inches) tape width (mm) quantity per reel BCV47TA aec-q101 zfg 7 8 3,000 bcv47tc aec-q101 zfg 13 8 10,000 bcv47qta automotive zfg 7 8 3,000 bcv47qtc automotive zfg 13 8 10,000 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen- and antimony-free, "gree n" and lead-free. ? 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm br omine, <900ppm chlorine (<1500ppm t otal br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap capabl e. automotive, aec-q101 and standard products are electricall y and thermally the same, except where specified. 5. for packaging details, go to our website at http://www.diodes.com. marking information zfg = product type marking code top view pin-out c e b top view device symbol sot23 zfg c e b
bcv47 document number: ds33001 rev. 4 - 2 2 of 5 www.diodes.com december 2012 ? diodes incorporated bc v 47 a product line o f diodes incorporated maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit collector-base voltage v cbo 80 v collector-emitter voltage v ceo 60 v emitter-base voltage v ebo 10 v continuous collector current i c 500 ma peak pulse current i cm 800 ma base current i b 100 ma thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 6) p d 310 mw (note 7) 350 thermal resistance, junction to ambient (note 6) r ja 403 c/w (note 7) 357 thermal resistance, junction to leads (note 8) r jl 350 c/w operating and storage temperature range t j, t stg -55 to +150 c notes: 6. for the device mounted on minimum recommended pad layout fr4 pcb with high coverage of single sided 1oz copper in sti ll air condition; the device is measured when operating in a steady-state condition. 7. same as note (6), except the dev ice is mounted on 15mm x 15mm fr4 pcb. 8. thermal resistance from junction to solder-point (at the end of the leads). 0 255075100125150 0.0 0.1 0.2 0.3 0.4 derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 50 100 150 200 250 300 350 400 transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 10m 100m 1 10 100 1k 0.1 1 10 single pulse. t amb =25c pulse power dissipation pulse width (s) max power dissipation (w)
bcv47 document number: ds33001 rev. 4 - 2 3 of 5 www.diodes.com december 2012 ? diodes incorporated bc v 47 a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition off characteristics collector-base breakdown voltage bv cbo 80 ? ? v i c = 100a collector-emitter breakdown voltage (note 9) bv ceo 60 ? ? v i ceo = 10ma emitter-base breakdown voltage bv ebo 10 ? ? v i ebo = 10a collector cut-off current i cbo ? ? <1 ? 100 10 na a v cb = 60v v cb = 60v, t a = +150c emitter-base cut-off current i ebo ? <1 100 na v eb = 4v on characteristics (note 9) static forward current transfer ratio h fe 2,000 4,000 10,000 2,000 ? ? ? i c = 100a, v ce = 1v i c = 10ma, v ce = 5v i c = 100ma, v ce = 5v i c = 500ma, v ce = 5v collector-emitter saturation voltage v ce ( sat ) ? ? 1.0 v i c = 100ma, i b = 0.1ma base-emitter saturation voltage v be ( sat ) ? ? 1.5 v i c = 100ma, i b = 0.1ma small signal characteristics (note 9) transition frequency f t ? 170 ? mhz i c = 50ma, v ce = 5v, f = 20mhz output capacitance c obo ? 3.5 ? pf v cb = 10v, f = 1mhz notes: 9. measured under pulsed conditions. pulse width 300s. duty cycle 2%
bcv47 document number: ds33001 rev. 4 - 2 4 of 5 www.diodes.com december 2012 ? diodes incorporated bc v 47 a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sot23 dim min max typ a 0.37 0.51 0.40 b 1.20 1.40 1.30 c 2.30 2.50 2.40 d 0.89 1.03 0.915 f 0.45 0.60 0.535 g 1.78 2.05 1.83 h 2.80 3.00 2.90 j 0.013 0.10 0.05 k 0.903 1.10 1.00 k1 - - 0.400 l 0.45 0.61 0.55 m 0.085 0.18 0.11 0 8 - all dimensions in mm dimensions value (in mm) z 2.9 x 0.8 y 0.9 c 2.0 e 1.35 a m j l d f b c h k g k1 x e y c z
bcv47 document number: ds33001 rev. 4 - 2 5 of 5 www.diodes.com december 2012 ? diodes incorporated bc v 47 a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
